Description

In addition to aesthetic qualities, exterior doors meet the highest performance requirements, withstanding the stresses of daily use. Our doors are characterized by strength, thermal insulation, security, user comfort, and aesthetically pleasing design.

  • They are stable.
  • They are resistant to deformation in changing weather conditions.
  • They exhibit high thermal insulation performance.
  • The use of thermally insulated low thresholds that fit tightly to the floor prevents heat loss and provides protection against blowing rain and strong winds.
  • A latch strip mounted on the frame provides an additional protection against burglary.
  • It is possible to increase the level of anti-theft protection by increasing the number of locking points from 3 to 5 and using an additional anti break-in protection on the hinge side.
  • With a wide selection of door models and fittings, such as handles, hinges, glass, and colors, we can provide an individual approach to the customer.
  • The customer can create their own design according to their ideas and preferences.
  • Depending on the amount of space, architectural and design concepts, and the possible need to bring more light into the room, you can have additional side and top transoms that have practical and decorative functions.
  • Inner cores and transom windows can be made of sandblasted glass, anti-theft glass, decorative glass, etc.

Inner cores are produced with HPL, aluminum, GRP, and PVC. Cured polyurethane foam provides good thermal insulation. Depending on the nature and style of the facade of the building, it is possible to make doors with batch and overlay filling.

Aluminum doors with batch filling

Aluminum doors with overlay filling

Models

EWA (structural), batch

Outward opening

Color: anthracite

Glass: matt with frame

Fittings: F1 knob

LENA, overlay

Inward opening

Color: white

Glass: matt

Fittings: P2 580 mm pull handle

MARLENA, overlay

Inward opening

Color: white

Glass: matt

Fittings: P2 580 mm pull handle

SABINA, overlay

Inward opening

Color: anthracite

Glass: matt

Fittings: P2 580 mm pull handle

SARA, overlay

Inward opening

Color: anthracite

Glass: matt

Fittings: P2 580 mm pull handle

IDA, overlay

Inward opening

Color: anthracite/red

Glass: matt

Fittings: P2 580 mm pull handle

BERTA, overlay

Inward opening

Color: anthracite

Glass: none

Fittings: P2 580 mm pull handle

MARTA, overlay

Inward opening

Color: anthracite

Glass: none

Fittings: P2 580 mm pull handle

ANGELA, overlay

Inward opening

Color: anthracite

Glass: matt

Fittings: P2 1000 mm pull handle

ADELA, overlay

Outward opening

Color: IGP 71386

Glass: frosted with pattern

Fittings: P2 1500 mm pull handle

ALU-SPIEK, overlay

Inward opening
Color: anthracite + sintered quartz
Glass: none
Fittings: P6 pull handle

ALU-WOOD, overlay

Inward opening
Color: black + fleece
Glass: transparent
Fittings: pull handle – custom design

ALU-WOOD, overlay

Inward opening
Color: anthracite + enigma
Glass: none
Fittings: P8 400 mm pull handle

DMD 8, overlay

Inward opening

Material: Aluminum

Model: DMD 8

Color: IGP 7004

Glass: reflective

Fittings: K1 580

DMD 10, overlay

Outward opening       

Material: Aluminum

Model: DMD 10

Color: IGP 7021   

Glass: reflective                                

Fittings: P10 2000

DMD 12, overlay

Outward opening       

Material: Aluminum

Model: DMD 12

Color: IGP 7021   

Glass: reflective                                

Fittings: P6 1500

DMD 11, overlay

Outward opening       

Material: Aluminum

Model: DMD 11

Color: anthracite       

Glass: reflective                                

Fittings: inox handle

ADELA, overlay

Outward opening

Material: Aluminum

Model: ADELA with transom

Color: anthracite

Glass: frosted with pattern                      

Fittings: P2 1500

Locks

GU Secury Automatic multi-point lock

Locks with three automatic bolts ensure a comfortable locking system for exterior doors. When the door is slammed shut, the bolts immediately extend and lock without a key. Three locking points guarantee a safe and secure locking of the door. If necessary, the number of locking points can be increased to five.

GU Secury SH multi-point lock

The use of hook locks effectively protects the door from being forced open in. This is thanks to the proper positioning of the hook bolts in the latches. Secure locking of the door is ensured with three or five locking points. Safety is further enhanced by a hardened steel insert resistant to sawing. The hooks can be extended only with a key.

Latch strip

Ferrules

Door handles define the actual element of each exterior door’s exterior appearance for a visual effect. Customers can choose from tubular, rectangular and square handles of various lengths. In the case of using door handles other than the handle, it is equivalent to the product selection of the product, against the entry of unauthorized persons. standard standard also opening the door without using a key. The choice of access control devices depends on the customer’s preferences and convenience.

P-6 inox pull handle

Length: 580 mm, 1000 mm, 1500 mm

P-5 inox pull handle

Length: 1000 mm

P-4 inox pull handle

Length: 580 mm, 1000 mm, 1500 mm

P-3 inox pull handle

Length: 580 mm

P-2 inox pull handle

Length: 580 mm, 1000 mm, 1500 mm

P-1 inox pull handle

Length: 580 mm, 1000 mm, 1500 mm

Inox handle

F1 – silver, F4 – retro gold

Inox knob

F1 – silver, F4 – retro gold

Hinges

Dr. Hahn VL-BAND 180

Dr. Hahn TÜRBAND 4 two-piece

Dr. Hahn TÜRBAND 4 three-piece

Accessories

Keypad with proximity sensor

A device for opening the door by a code enhanced with a built-in proximity reader. The reader allows you to securely open the door with proximity cards/key fobs if it is impossible to use a code, e.g. when other people are present.

Fingerprint reader

A device that enables secure, convenient, and professional fingerprint identification at the entrance door. It allows you to open the door without a key or card. Just save your fingerprint once and you can conveniently open the door with your fingerprint. You do not have to worry about your keys being lost, stolen, or copied. The innovative access control system detects even small changes, such as a child’s finger getting bigger with age.

Bluetooth & Code

A device that uses a sensor panel to open the door with a Bluetooth-enabled cell phone or a numeric code keypad. The option to enter a 4 to 6-digit code ensures even greater security and convenience of use. The device is installed directly on the door. The keypad has a backlight for nighttime operation. Bluetooth and keypad provide a contactless and keyless opening system. There is no need to hold the phone over the reader. The reading will take place when the phone is within range of the device. Entering the PIN code on the phone’s keypad provides additional security.

Code keypad

It allows the door to be opened with a code, providing users with security, convenience, and ease of use. The device is installed directly on the door, on the wall, or in the intercom. The keypad has a backlight, making it easy to use at night.

P4 slanted pull handle with Bluetooth reader

P5 pull handle with fingerprint reader

P5 pull handle with code keypad

P6 pull handle with wood and LED tape lighting

Pull handle with spot light

Windows

The use of modern and durable insulating glass units made of the highest quality components has a positive effect on the heat transfer coefficient of the entire window and, consequently, on the energy balance of the entire house. Appropriate selection of panes from the many available types improves the comfort of use and safety. Insulating glass units can include any glass configurations, gaining properties that ensure security and protection against attack, thermal insulation, protection against the sun, protection against noise and decorative values.

Light chinchilla

Mastercarre

Brown MATT

Colorless MATT

Graphite MATT

Montage

Proper assembly of windows and doors ensures their proper functioning, but also tightness by minimizing thermal bridges. The method of installation must be adapted to the structure of the wall and the materials it is made of. During assembly works, we use a warm polystyrene window sill as a standard, the task of which is to seal the places most exposed to heat loss. At the customer’s request, we can also install a warm window sill made of XPS extruded polystyrene.

Taking into account the value of the thermal conductivity coefficient (Ѱ), the customer can choose the appropriate type of assembly:

  • assembly in the wall, the window is extended approx. 1 cm outside the wall (Ѱ = 0.046 J/(m*K*S)
  • installation in the insulation zone (so-called warm installation), window protruding directly behind the wall (Ѱ = 0.013 J/(m*K*S)

A feature of the installation that reduces the impact of moisture is the use of three layers of materials in the contact area between the window and the wall. The inner layer made of a vapor barrier foil protects the mounting foam against the penetration of moisture from the inside of the building. The middle layer made of polyurethane foam permanently eliminates thermal bridges. The outer layer is made of a vapour-permeable tape that insulates the connections between the wall and the window frame and protects against the penetration of moisture inside, while allowing it to be led outside the building.

Another option is to use only self-adhesive polyurethane expansion tape that meets the requirements of energy-saving assembly. It provides vapor tightness from the inside, thermal and acoustic insulation of the middle layer and resistance to UV and weather conditions from the outside. Its use does not require special preparation of the substrate, it does not emit volatile substances.

We also offer our customers installation in the building insulation layer, the task of which is to eliminate thermal bridges around the frame. In this case, the window is placed in front of the wall, but it is attached to the wall using anchors, consoles or special installation frames. In addition, foam is used as thermal insulation and vapor-permeable and vapor-tight tapes.

Installation in the wall

Installation in the insulation zone

What makes us unique

Energy efficiency

We offer window and door systems with various widths. Therefore, customers can choose the optimal solution for themselves. Energy-saving window systems with the possibility of using a wide range of glazing units allow you to obtain a low heat transfer coefficient.

Safety

As a standard, our windows are equipped with three anti-burglary points. If necessary, their number can be increased. It is possible to install handles with an additional audible sound when turning the handle. The locking mechanism in the handle prevents tampering with it from the outside of the window by moving the peripheral hardware. An additional important element is a hardened steel plate against drilling the handle.

Middle seal

Three planes of gaskets ensure better sealing and thus a better heat transfer coefficient of the window.

Environmental issues

The PVC profiles we use are ecological and energy-saving high-quality products that enable the production of solid and durable structures with a modern look. The material used is stabilized with environmentally friendly lime and zinc. This material is highly resistant to light and weather conditions, including high temperatures.